SLCP verification result completion and accuracy percentage display description

Whether SLCP/Higg FSLM or Higg FEM, they are only an industry standard and a measurement tool, and are not traditional audit, without PASS and FAIL, but only verification. The SLCP verification result is the ratio of the factory's self-assessment result to the actual verification result of the third party company. Therefore, the final SLCP verification result shows two percentages: the percentage of completion and the percentage of accuracy.

Generally speaking, the higher the two ratios are, the better. However, the higher the percentage obtained does not mean the better the performance of the verified factory, but only reflects the higher the transparency of the factory.

For the problems found in the actual verification, different customers also have different requirements. For example, some will require continuous improvement, and some will require improvement plans and on-site follow-up.

The factory that has completed the verification will obtain a certificate of the completion of the verification. State when the factory has completed the validation and how long the validity period is. In another formal report, the two final validation parameters mentioned above will be displayed: the completion of self-assessment and the percentage of self-assessment accuracy.

Precautions for SLCP factory inspection

1. The SLCP validation data can be shared from one AH to another AH (i.e. the hosting platform). After the SLCP validation is completed, the factory can share the validation data at any AH to customers using the same AH or other AHs.

2. SLCP operation on the platform must be associated with the SLCP Gateway to perform subsequent operations. If it is not associated, it cannot be verified and shared. If the customer requires the factory to do SLCP, the factory can directly purchase and completeFSLM on HIGG and need to associate with SLCP Gateway.

3. There are about 3000 checkpoints for SLCP/FSLM. According to experience, it takes about 2-3 weeks for a factory to complete a self-assessment. The supplier should remember to leave enough time when completing the self-assessment required by the customer to ensure that the self-assessment is completed before the node required by the customer.

4. SLCP factory inspection suggests to find a suitable third-party inspection organization from the self-assessment stage, that is, before verification, to assist in completing the self-assessment test and subsequent factory inspection and verification stage, so as to avoidlow self-assessment scores that affect the effect of factory information sharing.